Product Detail
Masking Tape – 18mm x 50mm
$1.06
Masking Tape – 18mm x 50mm
- Warranty T.O.C Apply
- 30 Day Return Policy
- Cash on Delivery available
In Stock
CompareDescription
Masking Tape – 18mm x 50mm
Related products
- Add to WishlistAdd to Wishlist
Mid Clamps
This innovative masterpiece makes your next PV-project a whole lot easier. The RS1 works as mid- and end clamp. It is height adjustable and secures any framed PV panel starting from 30 mm up to 50 mm height. Twisting the RS1‘s head changes the functionality from end- to mid-clamp. Installation and positioning works one handed. At the same time it minimizes needed storage space and saves administrational costs in item management. The RS1 is a real time saver and generates savings over your entire value chain. Technical Data: Dimensions: 35x36.5x60 Weight: 0.083kg Set: complete pre-assembled set Material: Corrosion resistant steel Certification: TUV ID:48970; ETN BT120019; MCS012 IK0197 Module Types: Framed modules only Module Thickness: Between 30.0mm and 50.0mm Maximum Torque: 12,00 Nm Driver: Hexagon socket 5mm
- Add to basket
- Add to WishlistAdd to Wishlist
- Add to WishlistAdd to Wishlist
Masking Tape 12mm x 50m
- Masking tape and also known as painter's tape is a type of pressure-sensitive tape made of a thin and easy-to-tear paper. It can be easily removed from many surfaces, suitable to use when painting and to mask off areas that require paint.
- This masking tape is good quality and is easily applied and removed. Suitable for various applications including masking areas of your painting surface, however it is not suitable for use on paper.
- Also suitable for general purpose labeling and taping applications such as bundling, mounting and light packing.
- It is a lightly creped paper, coated with a solvent-based rubber/resin adhesive.
- Add to basket
- Add to WishlistAdd to Wishlist
- Add to WishlistAdd to Wishlist
IBR Steel Roof Brackets
NO RAILS needed Cost effective Rooftop mounting system for IBR and corrugated sheet metal roofs. This part allows Solar Panels to be mounted to IBR and corrugated metal roof areas and enables your system to be attached to the roof with self-tapping screws, rather than drilling through the sheet into the substructure with hanger bolts. The added bonus is that no mounting rail is required, which reduces the cost of the mounting dramatically. Featues PV-Mounting system reduced to the essential PV-MODULE LANDSCAPE ORIENTATION. For PV systems with framed pv-modules from 30 to 50 mm frame height. PV-Modules in landscape orientation. NON PRE-DRILLING INSTALLATION Installation directly into the metal roofing, with self-tapping and thread-forming screws. FOR STEEL Suitable for the installation of PV systems on sheet metal coverings made of steel in various thicknesses. Technical Data: Dimensions: 125x31x19.4 Weight: 0.067kg Material: Aluminum Application properties Application On-roof Roof material IBR, corrogated (with adaptor) EPDM preassembled Yes Attachment strip Yes Attachment for clamps Inside and outside Compatible with clamps Middle clamp 31 - 51 mm; End clamp 30 - 50 mm.
- Add to basket
- Add to WishlistAdd to Wishlist
- Add to WishlistAdd to Wishlist
Insulation Tape – 19mm x 20mm – Black
Insulation Tape - 19mm x 20mm - Black
- Add to basket
- Add to WishlistAdd to Wishlist
Reviews
There are no reviews yet.