Masking tape and also known as painter's tape is a type of pressure-sensitive tape made of a thin and easy-to-tear paper. It can be easily removed from many surfaces, suitable to use when painting and to mask off areas that require paint.
This masking tape is good quality and is easily applied and removed. Suitable for various applications including masking areas of your painting surface, however it is not suitable for use on paper.
Also suitable for general purpose labeling and taping applications such as bundling, mounting and light packing.
It is a lightly creped paper, coated with a solvent-based rubber/resin adhesive.
Features
12mm wide roll of masking tape
50 meter roll
Main Features:
●Small size, easy to carry
●3 optional brightness to choose
●USB port, easy to charge
Instructions:
● Push the plug out when charging and insert it directly in 5V socket, and charge indicator will be light. Full charging time needs 2 - 3 hours.
● While using, press the button for transforming 3 modes in turns.
● The flashlight can be lighted continuously for about 12 hours at low brightness, for 2 - 3 hours at high brightness.
Attentions:
● When the light is dim, please charge it immediately (Please keep charging once every two months). Otherwise it will affect the life seriously.
● Do not use it when charging. Otherwise it would burn the electric elements.
NO RAILS needed
Cost effective
Rooftop mounting system for IBR and corrugated sheet metal roofs. This part allows Solar Panels to be mounted to IBR and corrugated metal roof areas and enables your system to be attached to the roof with self-tapping screws, rather than drilling through the sheet into the substructure with hanger bolts. The added bonus is that no mounting rail is required, which reduces the cost of the mounting dramatically.
Featues
PV-Mounting system reduced to the essential
PV-MODULE LANDSCAPE ORIENTATION. For PV systems with framed pv-modules from 30 to 50 mm frame height. PV-Modules in landscape orientation.
NON PRE-DRILLING INSTALLATION Installation directly into the metal roofing, with self-tapping and thread-forming screws.
FOR STEEL Suitable for the installation of PV systems on sheet metal coverings made of steel in various thicknesses.
Technical Data:
Dimensions: 125x31x19.4
Weight: 0.067kg
Material: Aluminum
Application properties
Application On-roof Roof material IBR, corrogated (with adaptor)
EPDM preassembled Yes
Attachment strip Yes
Attachment for clamps Inside and outside
Compatible with clamps Middle clamp 31 - 51 mm; End clamp 30 - 50 mm.
3k Must Hybrid Inverter with 50Amp Controller is a multifunction inverter/charger, combining functions of inverter, solar charger and battery charger to offer uninterrupted power support with portable size. 3k Must Hybrid Inverter comprehensive LCD display offers user-configurable and easy-accessible button operation such as battery charging current, AC/solar charger priority, and acceptable input voltage based on different applications.
Features:
LCD display
Status indicator
Charging indicator
Fault indicator
Function buttons
Power on/off switch
AC input
AC output
PV input
Battery input
Circuit breaker
RS232 communication port
Parallel communication cable (only for parallel model)
Current sharing cable (only for parallel model)
Dry contact
Reviews
There are no reviews yet.